[Aluminum windows and doors] aluminum windows and doors Yantai, Yantai insulation bridge, aluminum windows and doors of Yantai aluminum alloy doors and windows broken bridge aluminum doors and windows of the production process is extremely strict, are in accordance with national production standards of the Its production process. 
 Clean up the hole - adjust the window frame - fixed window frames - glass installation - sash installation - gap seal repair 
 B, aluminum window frames installation: 
 a. Pad placed on the lower wall, pay attention to the measurement mark. 
 and b. Window frames will be placed in the window inside the cave, to calibrate the location of the window inside the cave, move to the two side; calibration level degree in the next box under the box plug pad, while adjusting the junction with the wall, and wall the average gap distance; Note on box the gap in the upper end of the mullion, the pin cage. 
 (c) Detection and adjustment of the mullion and the edge of the contact, and use a spirit level, window profiles should be straight when using the pin not to profile deformation. 
 C, fixed window frame: 
 Fixed piece fixed, can absorb the deformation of the wall, fixed piece galvanized steel parts, one end connected through the box of screws and steel vice connected to the frame and the wall without any tension, with the nail gun will brackets on the wall, this fixed piece of the framework of horizontal and vertical changes in force, profiles the fixed parts of the tiny rotation and stretching to maintain a balance. 
 D glass and sash installation: 
 Framework is installed in the hole after the installation of glass and open fan, prefabricated glass processing plant has been completed, each piece of glass has a labeled graph on the glass by soft contact specified according to the label position on the sub-grid diagram the location box pads, adjust the left and right position of the glass, the glass around the centerline with the centerline of sub-grid, use the buckle (buckle put on tape and glass contact surface, to avoid hard contact and damage to the glass) will The glass is fixed on the frame. Fixed fan glass installed, install the open fan. The casement window is open the fan connected through the hinge and fixed the hole in the window frame. Small error can do the appropriate adjustments, in serious cases, to remove the glass to be adjusted, check the fit of the sash and window frames is uniform, such as uneven to calibration in the window frame lock side. 

 The broken bridge aluminum doors and windows have become the first choice for modern people to buy windows and doors, is it energy saving of around 50%. Bridge, aluminum doors and windows in fear of the problem of aging, no gas pollution problems. Building life cycle, the doors and windows can be recycled and will not cause environmental pollution for the next generation. Bridge aluminum doors and windows have been identified as a "green" products. 
 Yantai Hai Rui aluminum windows and doors (formerly the winter sea, aluminum windows and doors) 
 Contact: Manager Liu 
 Tel: 13864566389 
 Fax :0535-3482778 
 QQ: 1716066822 
 E-mail: 1,716,066,822 @ qq com 
 Web site: www.ythairui.com 
 Address: Yantai City happy nine village Linfair, Lu pay 1-23 (Yantai Harbor Hospital to the west 500 meters)